Results 1 to 4 of 4
  1. #1
    jboet is offline Junior Member
    Join Date
    Oct 2007
    Posts
    7

    Default Fuji vs Konica violet plates

    Anyone have an opinion on switching from Fuji to Konica plates. The cost savings is almost to good to be true.
    Last edited by jboet; 02-23-2010 at 12:18 PM.

  2. #2
    printnewb is offline Junior Member
    Join Date
    Feb 2010
    Posts
    27

    Default

    I heard that quality might be different. Make sure u test them first.

  3. #3
    spectrecom's Avatar
    spectrecom is offline Member
    Join Date
    Jan 2008
    Location
    Los Angeles, CA
    Posts
    57

    Default Konica Plates work fine

    Fuji Plates are great plates...however Konica Plates are great too. Fuji Violet Plates require higher laser power so in most cases a 30 mW violet laser just won't cut it, you need a 60mW laser. The Konica plate has close to the same laser spec as the Agfa N91V plates, can use 30mW and 60mW lasers...i would say if the plates and processor are set up correctly you won't see any difference in print quality.

  4. #4
    jboet is offline Junior Member
    Join Date
    Oct 2007
    Posts
    7

    Default

    Thank you for your input


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Sponsors