ultre pci interface

[prepressing]

You may be able to upgrade your RIP at Harlequin RIP, Harlequin RIPs, Software RIP, NEW! Harlequin Software RIP Version 8.1
The thing is that with an Ultre Corp card you are really limited because if you are using a Windows dongle with an Ultre Corp card, it will only work on Windows 95/98 or Windows NT. That card will not work with Windows 2000, XP, Vista or 7. Since it sounds like your dongle is Windows 95/98 you are even further limited because that dongle has to run on Windows 95 or 98 and cannot run on NT. Finding a Windows 95/98 installer is going to be difficult, but someone may still have floppies for it. Hopefully someone in the forum has them and can assist you.

[armagedondon]

I hope that somebody has them. Thanks to all by your interest.
If nobody has them I will buy a filmadora of occasion.

[printnewb]

please I need the drivers for one ultre pci interface.
The imagesetter is ultre 94.
Windows gave to failure pciu.vxd me

Sounds like Windows is not recognizing the PCI card. Is this a new computer? If so, you probably need to get a computer with a classic 5v PCI slot. Try an older computer.

Printnewb

[armagedondon]

It was working perfectly but I lost the archives pciu.vxd and pciu.386 in a reset.
I have tried to recover them but they have disappeared.
The computer ir pentium 2 350mhz.

[printnewb]

if this is a pci.vxd file it is a Windows PCI driver. Probably corrupt.
Yikes! a pentium 2? get a new computer.

printnewb

[VladCanada]

If you have original floppies, try to re-install RIP. Lost drivers will appear again.

[armagedondon]

I do not have original discs. That is what I look for.

[printnewb]

You might want to consider buying a newer Windows OS. Make sure it's one that is compatible with the software. Possibly Win2k or XP. You also have to think about what caused the error. It maybe a faulty hard drive or motherboard. In that case .... new computer time.

[VladCanada]

armagedondon does not have RIP distributive, so... RIP transfer... mission impossible.
He was in jeopardy for years, now he has his local Armageddon.

[armagedondon]

Now I have another problem. It distorts 25% to me in horizontal.
In the previsualization it comes out size well, but when it prints the image leaves 25% but extended. Somebody could help me?.